伊诺特SSZ系列折叠滤芯采用不锈钢编织网或不锈钢纤维烧结毡焊接而成,空隙率极高。优异的机械性能,抗高低温性能及化学稳定性,适用于大流量过滤、蒸汽过滤、各种高低温气体液体、高精度强腐蚀性流体的预过滤,可反复清洗,反洗,反吹。
在线咨询 189-5158-8991折叠工艺、高容量,相对普通圆柱滤芯4倍面积以上
能承受高反向流动
可反复清洗
无任何添加剂,符合GMP标准
型号规格
型号规格 | 直径(mm) | 长度 (mm) | 过滤面积 (m2) |
SSZ-65/250 | 65 | 250 | 0.135 |
SSZ-65/500 | 65 | 500 | 0.38 |
SSZ-65/750 | 65 | 750 | 0.61 |
SSZ-65/500 | 86 | 500 | 0.5 |
SSZ-100/800 | 100 | 800 | 1.0 |
SSZ-60/1000 | 60 | 1000 | 0.81 |
SSZ-60/1200 | 60 | 1200 | 0.98 |
SSZ-60/1400 | 60 | 1400 | 1.1 |
流量
以水为单位,10″为单位,压降为70mbar
尺寸 | 2.0μm | 5.0μm | 10μm | 20μm | 40μm | 75μm | 100μm | 120μm-840μm |
GPM | 1.2 | 4.5 | 8.0 | 12 | 16 | >18 | >18 | >18 |
LPM | 4.54 | 17.03 | 30.28 | 45.42 | 60.56 | >68.13 | >68.13 | >68.13 |
The following table represents typical water flow at a one psi (69 mbar) pressure differential across a single 10 inch pleated cartridge element. The test fluid is water at ambient temperature. Extrapolation for housings with multiple elements and higher pressure drops is acceptable, but as flows increase the pressure drop of the housing becomes more apparent. For 10 micron and above, the recommended maximum flow rate per 10” is 7 –8 gpm for maximum service life.
压力
特殊的设计,可以使滤芯承受高达400KG的工作压力,30Kg的反压差。
精度
绝对精度3-200μm;以液体为单位
滤芯连接方式
外螺纹 | 内螺纹 | 222 |
226 | flat |